Detailed introduction
NMB ball bearing guarantee long life;
Compact size but output high pressure and airflow.
Very Suitable for compact system or tools.
Can Choose wonsmart External driver controller.
Driver controller can change speed by PWM or 0~5v signal.
Notes:
1 Do not use max pressure as working point, this point is not safe since airflow is too small.
2 To add a filter onto the inlet can make the blower run longer time;
3 The right impeller run direction is CCW.
Wiring diagram |
|||
Pin1 |
Red |
red |
+5V |
Pin2 |
Purple |
purple |
Hall A |
Pin3 |
Green |
green |
Hall B |
Pin4 |
Grey |
gray |
Hall C |
Pin5 |
Black |
black |
GND |
Pin6 |
Yellow |
yellow |
Phase A |
Pin7 |
Blue |
blue |
Phase B |
Pin8 |
White |
white |
Phase C |
WS9250-24-240-X200 |
WS9250-24-220-X200 |
24VDC |
24VDC |
24,000rpm |
22,000rpm |
6.5A |
5A |
42m³/h |
37m³/h |
28,500rpm |
26,500rpm |
2.3A |
2.2A |
8kPa |
6.8kPa |
P/N: |
unit |
WS9250-24-240-X200 |
WS9250-24-220-X200 |
Rated Voltage |
[V] |
24 |
24 |
Noise |
[dBA] |
80 |
80 |
Motor Pole pairs |
|
2 |
2 |
Resistance --Phase to Phase |
[Ohm] |
0.62 |
0.66 |
Motor type |
Three Phase Brushless |
Bearing type |
NMB Ball bearing |
Dielectric Strength |
500VDC for 1min |
Insulation Class |
Class F |
Protect Class |
IP54 |
Operating Temperature range |
-20deg.C~+50deg.C(No Condensation) |
Service Life L10(40 C degree Rated Operation Point) |
10,000 hours |
(Winding Type) |
(Delta) |
Hall effect Sensor |
120 |
Speed and Hall pulse relationship |
1Hz=30 r/min |
Product Mass |
400g |